What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0708RANGE SWITCH SHORT CIRCUIT OR MULTIPLE INPUTSManufacturer communications
4Original wording in English
HYUNDAI
Reported code forms P0708
If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ? Diagnostic trouble codes: ?P0705 - Range switch sensor circuit ?P0706 - Range switch…
HYUNDAI
Reported code forms P0708
If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ? Diagnostic trouble codes: ? P0705 - Range switch sensor circuit ? P0706 - Range switch…
HYUNDAI
Reported code forms P0708
HYUNDAI: DUE TO AN IMPROPERLY ADJUSTED OR IMPROPERLY OPERATING INHIBITOR SWITCH (RANGE SWITCH), ON SOME VEHICLES, RESULTED IN RANGE SWITCH SENSOR CIRCUIT (P0705), OPEN CIRCUIT (P0707), SWITCH RANGE/PERFORMANCE (P0706),…
HYUNDAI
Reported code forms P0708
HYUNDAI: AUTOMATIC TRANSAXLE RANGE SWITCH DIAGNOSTIC TROUBLE CODES P0705 (RANGE SWITCH SIGNAL PROBLEMS), P0707 (RANGE SWITCH OPEN CIRCUIT), AND P0708 (RANGE SWITCH SHORT CIRCUIT OR MULTIPLE INPUTS). AN IMPROPERLY…
Check vehicle applicability
16A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Hyundai | TUCSON | 2019 |
| Hyundai | TUCSON | 2018 |
| Hyundai | TUCSON | 2017 |
| Hyundai | TUCSON | 2016 |
| Hyundai | TUCSON | 2015 |
| Hyundai | TUCSON | 2014 |
| Hyundai | TUCSON | 2013 |
| Hyundai | TUCSON | 2012 |
| Hyundai | TUCSON | 2011 |
| Hyundai | TUCSON | 2010 |
| Hyundai | TUCSON | 2009 |
| Hyundai | TUCSON | 2008 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.