HomeP0706 · Code meaning and manufacturer information
Powertrain

P0706

Code meaning and manufacturer information

P0706

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

HinoP0706
Abnormality In D Range Pressure An enhanced neutral switch and transmission harness are available to address these concerns

NHTSA 10128685

View all · Manufacturer wording →

Manufacturer communications

32

Original wording in English

TSB_2034863_5

AUDI

Reported code forms P0706

This bulletin provides infomraiotn when there is a gearbox malfunction message in the instrument clostuer; DTC P0706; vehicles with 0AW gearbox.

Read communication ↗

23-AT-008H-1

HYUNDAI

Reported code forms P070600 P070661 P070696

If you are servicing an 8-speed front-wheel-drive vehicle equipped with automatic transaxle with one or more of the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. • DIAGNOSTIC…

Read communication ↗

23-AT-009H

HYUNDAI

Reported code forms P070600 P070661 P070696

If you are servicing an 8-speed DCT front-wheel-drive vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. • DIAGNOSTIC TROUBLE CODES: ➢ P070500 - Transmission range…

Read communication ↗

1807223

RAM

Reported code forms P0706

Engine Control Module (ECM) Capacitor Leak Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the one or more of the following Diagnostic…

Read communication ↗

TSB-23-23-002

MITSUBISHI

Reported code forms P0706

This Technical Service Bulletin provides instructions to update the software for the TCM (Transmission Control Module)/SCU (Shift by Wire Control Unit) when the TCM detects DTC: P0780/P0706.

Read communication ↗

View all →

Check vehicle applicability

200

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

MakeModelModel year
AudiA42016
AudiA42015
AudiA42014
AudiA42013
AudiA42012
AudiA42011
AudiA42007
AudiA42006
AudiA42005
AudiA42004
AudiA42003
AudiA42002
View all vehicle records →

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.