What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0705Transmission Range Sensor CircuitP0705RANGE SWITCH SIGNAL PROBLEMSP070514Transmission range sensor circuit malfunction ➢P07051CTransmission range sensor circuit malfunction ➢View all · Manufacturer wording →
Manufacturer communications
7Original wording in English
HYUNDAI
Reported code forms P070500 P070512 P070514 P07051C
If you are servicing an 8-speed front-wheel-drive vehicle equipped with automatic transaxle with one or more of the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. • DIAGNOSTIC…
HYUNDAI
Reported code forms P070500 P070512 P070514 P07051C
If you are servicing an 8-speed front-wheel-drive vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ï‚· DIAGNOSTIC TROUBLE CODES: P070500 - Transmission range…
HYUNDAI
Reported code forms P0705
If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ? Diagnostic trouble codes: ?P0705 - Range switch sensor circuit ?P0706 - Range switch…
HYUNDAI
Reported code forms P0705
This bulletin describes the service procedure to replace the inhibitor switch. A possible symptom is Diagnostic Trouble Code P0705 (Transmission Range Sensor Circuit).
HYUNDAI
Reported code forms P0705
If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ? Diagnostic trouble codes: ? P0705 - Range switch sensor circuit ? P0706 - Range switch…
HYUNDAI
Reported code forms P0705
HYUNDAI: DUE TO AN IMPROPERLY ADJUSTED OR IMPROPERLY OPERATING INHIBITOR SWITCH (RANGE SWITCH), ON SOME VEHICLES, RESULTED IN RANGE SWITCH SENSOR CIRCUIT (P0705), OPEN CIRCUIT (P0707), SWITCH RANGE/PERFORMANCE (P0706),…
Check vehicle applicability
19A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Hyundai | TUCSON | 2024 |
| Hyundai | TUCSON | 2023 |
| Hyundai | TUCSON | 2022 |
| Hyundai | TUCSON | 2019 |
| Hyundai | TUCSON | 2018 |
| Hyundai | TUCSON | 2017 |
| Hyundai | TUCSON | 2016 |
| Hyundai | TUCSON | 2015 |
| Hyundai | TUCSON | 2014 |
| Hyundai | TUCSON | 2013 |
| Hyundai | TUCSON | 2012 |
| Hyundai | TUCSON | 2011 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.