HomeP0606 · Manufacturer communications

P0606 · Manufacturer communications

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

P0606 →

TSB_2077462_1

AUDI

Reported code forms P060600

This TSB states to follow GFF in instances when DTC P0ED02 is logged then check the diagnostic address for DTCs P0A1F00, P060400, P062F00, P060600, P061000, P151A00.

Read communication ↗

AUDI

Reported code forms P060600

This Pending Service Solution requests that a PSS record be created when the MIL Drive System: Fault is stored in the ECM with DTC P06C00, P060600, or P0A0F00.

Read communication ↗

AUDI

Reported code forms P060600

Customer may report that the transmission warning light comes on. There are no drivability/starting concerns. DTC P060600 is stored in the TCM. The entry is caused by an overly sensitive diagnosis in the transmission…

Read communication ↗

AUDI

Reported code forms P060600

Supersedes Technical Service Bulletin Group 37 number 13-95 dated February 26, 2013. Customer may report that the transmission warning light comes on. There are no drivability/starting concerns. DTC P060600 (Control…

Read communication ↗

AUDI

Reported code forms P060600

Supersedes Technical Service Bulletin Group 37 number 13-89 dated February 11, 2013. Customer may report that the transmission warning light comes on. There are no drivability/starting concerns. GFF scan shows fault…

Read communication ↗

AUDI

Reported code forms P060600

Supersedes Technical Service Bulletin Group 37 number 12-61 dated August 20, 2012. Customer may report that the transmission warning light comes on. There are no drivability/starting concerns. GFF scan shows fault code…

Read communication ↗