P0570

Severity: High

Cruise Control Accel Signal Malfunction

Last updated: July 2026

System

Powertrain

Subsystem

Vehicle Speed, Idle & Auxiliary Inputs

Code Type

Generic (SAE)

What does P0570 mean?

P0570 is a generic (SAE) powertrain diagnostic trouble code. It is defined as "Cruise Control Accel Signal Malfunction". It falls under the vehicle speed, idle & auxiliary inputs area of the vehicle’s powertrain system, and has the same core meaning across most makes and models.

When is P0570 set?

The onboard diagnostic system sets P0570 when it detects a condition matching "cruise control accel signal malfunction" in the vehicle speed, idle & auxiliary inputs circuit or system. When the fault is confirmed, the module stores the code and, in most cases, turns on a warning light.

This code is generally considered serious. Continued driving may worsen the fault or affect safety and drivability. Have it diagnosed promptly.

Common symptoms

Check engine light (MIL) illuminated
Rough running, hesitation or loss of power
Increased fuel consumption
Difficulty starting or stalling

Possible causes

A failing or contaminated sensor in the affected circuit
Wiring, connector or ground problems
Vacuum, intake or exhaust leaks
A worn or failing mechanical component
Occasionally, a fault in the control module itself

What to check first

Scan for all stored and pending codes and note the freeze-frame data
Inspect the wiring and connectors for the affected circuit
Check for related leaks, loose components or obvious damage
Test the relevant sensor and its reference/ground with a meter
Clear the code and retest to see whether it returns

Frequently asked questions

What does the P0570 code mean?

P0570 means "Cruise Control Accel Signal Malfunction". It is a generic powertrain trouble code in the vehicle speed, idle & auxiliary inputs area.

Is it safe to drive with a P0570 code?

Because this code is often serious, it is best to limit driving and have the vehicle diagnosed as soon as possible. Continuing to drive may worsen the fault or affect safety.

How do I fix a P0570 code?

There is no single fix. Start by confirming the code with a scan tool, then work through the likely causes and checks above — inspecting wiring, connectors and the relevant components before replacing any parts. On most vehicles, confirm the diagnosis before repairs.

Can I clear the P0570 code myself?

You can clear the code with an OBD-II scan tool, but if the underlying fault is still present it will usually return. Clearing without repair is only useful to confirm whether the fault is active.

Related codes

P0571

Cruise Control/Brake Switch A Circuit Malfunction

P0572

Cruise Control/Brake Switch A Circuit Low

P0569

Cruise Control Coast Signal Malfunction

P0573

Cruise Control/Brake Switch A Circuit High

Important

This information is provided for general reference only. It is not repair advice and may not apply to every make or model. Manufacturer-specific codes can differ. Always confirm a diagnosis with a scan tool and, where needed, a qualified technician before replacing parts.