What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0401Exhaust Gas Recirculation Flow Insufficient DetectedP0401EXHAUST GAS RECIRCULATION FLOW INSUFFICIENT DETECTEDManufacturer communications
15Original wording in English
TOYOTA
Reported code forms P0401
Warranty Enhancement Program: Toyota has received reports of a rough idle and/or rattle noise from the transaxle at cold start due to a sticking Exhaust Gas Recirculation (EGR) Valve in some vehicles. If this occurs,…
TOYOTA
Reported code forms P0401
Warranty Policy Bulletin (POL16-04): Toyota has received reports of a rough idle and/or rattle noise from the transaxle at cold start due to a sticking Exhaust Gas Recirculation (EGR) Valve in some vehicles. If this…
TOYOTA
Reported code forms P0401
Warranty Policy Bulletin (POL16-04): In these vehicles, Toyota has received some reports of a rough idle and/or rattle noise from the transaxle at cold start due to a sticking Exhaust Gas Recirculation (EGR) Valve. If…
TOYOTA
Reported code forms P0401
Dealer Letter: In these vehicles, Toyota has received some reports of a rough idle and/or rattle noise from the transaxle at cold start due to a sticking Exhaust Gas Recirculation (EGR) Valve. If this occurs, the…
TOYOTA
Reported code forms P0401
Dealer email: In these vehicles, Toyota has received some reports of a rough idle and/or rattle noise from the transaxle at cold start due to a sticking Exhaust Gas Recirculation (EGR) Valve. If this occurs, the vehicle…
TOYOTA
Reported code forms P0401
WARRANTY POLICY BULLETIN (POL16-04): IN THESE VEHICLES, TOYOTA HAS RECEIVED SOME REPORTS OF A ROUGH IDLE AND/OR RATTLE NOISE FROM THE TRANSAXLE AT COLD START DUE TO A STICKING EXHAUST GAS RECIRCULATION (EGR) VALVE. IF…
Check vehicle applicability
3A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Toyota | PRIUS PLUG-IN HYBRID | 2012 |
| Toyota | PRIUS PLUG-IN HYBRID | 2011 |
| Toyota | PRIUS PLUG-IN HYBRID | 2010 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.