AUDI
Reported code forms P030000
This bulletin provides information when the MIL is on; DTCs for misfire, air/fuel ratio imbalance, or lean fuel system stored in the ECM P030000.
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
AUDI
Reported code forms P030000
This bulletin provides information when the MIL is on; DTCs for misfire, air/fuel ratio imbalance, or lean fuel system stored in the ECM P030000.
AUDI
Reported code forms P0300
This bulletin provides information when the MIL is illuminated, cylinder misfires; P0300, P0301, P0302, P0303, P0304, P0305, P0306
AUDI
Reported code forms P0300
This bulletin provides information for when the MIL is illuminated, DTCs P0300, P0301, P0302, P0303, P0304, P0305, P0306.
AUDI
Reported code forms P0300
This bulletin requests that technicians create a Pending Service Solutions record in the Pending Service Solutions Database in instances where there are misfires with DTCs P0300 through P0306.
AUDI
Reported code forms P0300
This bulltin provides information for when the MIL, cylinder misfires, DTCs P0300, P0301, P0302, P0303, P0304, P0305, P0306.
AUDI
Reported code forms P0300
This bulletin provides information for when the MIL is on and DTCs P0300, P0301, P 0302, P0303, P0304, P0305, or P0306 may be stored.
AUDI
Reported code forms P0300
This bulletin requests that technicians open a PSS record when the MIL is illuminated and DTCs P0300 - P0306 may be stored.
AUDI
Reported code forms P0300
This bulletin provides instructions for when the MIL illuminated, and one or more DTCs may be stored; DTC P0300, P3031, P0302, P0303, P0304, P0305, P0306.
AUDI
Reported code forms P0300
software update is available for instances where the MIL is illuminated with one of the following DTCs: P0300, P0301, P0302, P0303, P0304, P0305, P0306.
AUDI
Reported code forms P030000
This bulletin states to continue diagnosis when there are corrosion marks with DTC P030000.
AUDI
Reported code forms P0300
Supersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after…