What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0217-00Engine Coolant Over TemperatureManufacturer communications
34Original wording in English
FORD, LINCOLN
Reported code forms P0217
Some 2024-2026 Explorer/Aviator/Police Interceptor Utility vehicles may exhibit an illuminated malfunction indicator (MIL) lamp with engine over-temperature warning in the message center and poor air conditioning (A/C)…
VOLVO
Reported code forms P0217-00
These repair instructions are intended to address the following fault: P0217-00 (Engine Coolant Over Temperature).
FORD
Reported code forms P0217
Some 2019-2020 Transit Connect vehicles may exhibit a false overheat condition and illuminated malfunction indicator lamp (MIL) with DTCs P1299 and/or P0217 present. Prior to any diagnostics, disconnect the generator…
FORD
Reported code forms P0217
Some 2014-2019 Fusion vehicles built on or before 10-Jun-2019 and 2017-2019 Escape vehicles built on or before 08-Apr-2019 equipped with a 1.5L EcoBoost engine may exhibit low coolant level, white exhaust smoke and/or…
FORD, LINCOLN
Reported code forms P0217
Some 2015-2018 Edge and 2017-2019 Fusion/MKZ/Escape/MKC vehicles equipped with a 2.0L EcoBoost engine may exhibit a low coolant level, white exhaust smoke and/or a runs rough condition with or without an illuminated…
FORD
Reported code forms P0217
Certain 2017-2019 Model Year Fusion and Escape Vehicles Equipped with a 1.5L GTDI Engine – Short Block Replacement After Coolant Intrusion. In some of the affected vehicles the 1.5L EcoBoost engine may exhibit a low…
Check vehicle applicability
143A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Ford | EDGE | 2020 |
| Ford | EDGE | 2019 |
| Ford | EDGE | 2018 |
| Ford | EDGE | 2017 |
| Ford | EDGE | 2016 |
| Ford | EDGE | 2015 |
| Ford | ESCAPE | 2020 |
| Ford | ESCAPE | 2019 |
| Ford | ESCAPE | 2018 |
| Ford | ESCAPE | 2017 |
| Ford | ESCAPE | 2016 |
| Ford | ESCAPE | 2015 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.