HomeP0183 · Code meaning and manufacturer information
Powertrain

P0183

Code meaning and manufacturer information

P0183

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

Manufacturer communications

4

Original wording in English

NTB20-094

NISSAN

Reported code forms P0183

2015-2020 ROGUE; MIL ON WITH DTC P0181 AND/OR P0183 IF YOU CONFIRM The MIL is ON with DTC P0181 (FTT SENSOR) and/or P0183 (FTT SEN/CIRCUIT) stored in the ECM. ACTION 1. Remove the fuel pump assembly. 2. Inspect the fuel…

Read communication ↗

TSB0113002

MITSUBISHI

Reported code forms P0183

SUBJECT REGARDING DIAGNOSTIC TROUBLE CODE P0183 TROUBLESHOOTING SERVICE MANUAL REVISION. *TT

Read communication ↗

12535

FORD

Reported code forms P0183

VEHICLES EQUIPPED WITH THE 2.0L ZETEC ENGINE MAY EXHIBIT A CHECK ENGINE LIGHT ON AND POSSIBLE DIAGNOSTIC TROUBLE CODES (DTC) P0180, P0181, P0182 AND / OR P0183 AFTER REPLACING THE 9D930 ENGINE WIRING HARNESS AND / OR…

Read communication ↗

5855

FORD

Reported code forms P0183

VEHICLES MAY EXHIBIT A CHECK ENGINE LIGHT ON AND DTC P0180, P0181, P0182 AND / OR P0183 AFTER REPLACING THE 9D930 ENGINE WIRING HARNESS AND / OR THE 12A581 ELECTRONIC ENGINE CONTROL (EEC) WIRING HARNESS. *TT

Read communication ↗

Check vehicle applicability

8

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

MakeModelModel year
FordZX2 (ESCORT)1998
MitsubishiMONTERO SPORT2001
NissanROGUE2020
NissanROGUE2019
NissanROGUE2018
NissanROGUE2017
NissanROGUE2016
NissanROGUE2015

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.