What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0103MAF Sensor Circuit shorted HighP0103MAF Sensor Circuit shorted HighP0103AIR INDUCTION SYSTEM WATER/SNOW DEFLECTOR KITP0103MASS OR VOLUME AIR FLOW CIRCUIT HIGH INPUTManufacturer communications
20Original wording in English
FORD
Reported code forms P0103
Some 2018 EcoSport vehicles equipped with a 2.0L Duratec engine may exhibit an illuminated MIL and/or a wrench lamp with diagnostic trouble codes (DTCs) P025A, P0103 and U0109 all present. Inspect for loose connections…
DODGE
Reported code forms P0103
Flash: Powertrain Diagnostic and System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp…
FORD
Reported code forms P0103
SOME 2014-2016 TRANSIT CONNECT VEHICLES EQUIPPED WITH THE 2.5L ENGINE MAY EXHIBIT A CONSTANT OR INTERMITTENT ILLUMINATED MIL WITH VARIOUS DRIVABILITY ISSUES AND ONE OR MORE OF THE FOLLOWING DTCS: P0010, P0103, P0104,…
DODGE
Reported code forms P0103
Flash: 6.2L Powertrain Diagnostic And System Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) and Transmission Control Module (TCM) with new software. A small…
CHRYSLER, DODGE
Reported code forms P0103
Flash: 6.2L / 6.4L Diagnostic And System Improvements This bulletin involves reprogramming of the Powertrain Control Module (PCM) with the latest software. A small number of customers may experience one or more of the…
FORD
Reported code forms P0103
FORD: ON SOME VEHICLES, THE INTELLIGENT ACCESS REMOTE START WILL EXPERIENCE DIAGNOSTIC TROUBLE CODES (DTCS) P025A/U0109, P025A/U0109/P0103, P025A/P0103/P1A0C, AS WELL AS STALLING AFTER VEHICLE WAS DRIVEN AND CRANK NO…
Check vehicle applicability
108A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | A4 | 2003 |
| Audi | A4 | 2002 |
| Audi | A8 | 2006 |
| Audi | A8 | 2005 |
| Audi | A8 | 2004 |
| Audi | A8 | 2003 |
| Audi | ALLROAD | 2004 |
| Audi | RS6 | 2004 |
| Audi | RS6 | 2003 |
| Audi | S4 | 2008 |
| Audi | S4 | 2007 |
| Audi | S4 | 2006 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.