What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0088Rail fuel pressure too highManufacturer communications
2Original wording in English
AUDI
Reported code forms P008800
This bulletin provides instructions for when the MIL is on, and the vehicle either runs roughly or does not start in the presence of one or more of the following DTCs: P008700, P008800, P019100
AUDI
Reported code forms P0088
Supersedes Technical Service Bulletin Group 01 number 11-18 dated January 25, 2011. MIL on. DTC P0087 (Rail fuel pressure too low) or DTC P0088 (Rail fuel pressure too high) stored in the memory of the engine control…
Check vehicle applicability
4A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.