What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0087Fuel Rail Pressure Too Low - Bank 1P0087-00Fuel Line Pressure Sensor - Bank 1 - Pressure Below LimitP0087-00Sensor De Pressão Da Linha De Combustível - Banco 1 - Pressão Abaixo Do LimiteP0087Sensor De Pressão Da Linha De Combustível - Banco 1 - Pressão Abaixo Do LimiteManufacturer communications
10Original wording in English
JEEP
Reported code forms P0087-00
Not applicable to vehicles built for US market. High Pressure Fuel Pump Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following…
JEEP
Reported code forms P0087-00
Not applicable to vehicles built for US market. High Pressure Fuel Pump Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following…
JEEP
Reported code forms P0087-00
Not applicable to vehicles built for US market. Fuel Injector Leak Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic…
JEEP
Reported code forms P0087-00
Not applicable to vehicles built for US market. Fuel Injector Leak Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic…
JEEP
Reported code forms P0087-00
Not applicable to vehicles built for US market. Fuel Injector Leak Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic…
JEEP
Reported code forms P0087
Fuel Injector Leakage NOTE: Does not apply to vehicles built for US Market. Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following…
Check vehicle applicability
4A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.