What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer communications
3Original wording in English
AUDI
Reported code forms P001600
This bulletin states that if DTC P227900, P001600, and DTC P001700 recorded together in the ECM to follow the isntructions on replacing the intake manifold pressure sender.
AUDI
Reported code forms P001600
AUDI: MIL ON; NOISE FROM TIMING CHAIN (DTC P001600). MIL ON; ENGINE DIFFICULT TO START; SOMETIMES RATTLE IN ENGINE COMPARTMENT; BANK 1, CAMSHAFT POSITION G40/CRANKSHAFT POSITION SENSOR G28, WRONG ASSIGNMENT STORED IN…
AUDI
Reported code forms P0016
AUDI: MIL ON. DTC P0016 CRANKSHAFT POSITION, CAMSHAFT POSITION CORRELATION BANK 1 SENSOR A; DTC P0017 CRANKSHAFT POSITION, CAMSHAFT POSITION CORRELATION BANK 1 SENSOR B; DTC P0018 CRANKSHAFT POSITION, CAMSHAFT POSITION…
Check vehicle applicability
2A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.