HomeP0011 · Camshaft A timing over-advanced or system performance · Bank 1
Powertrain

P0011

Camshaft A timing over-advanced or system performance · Bank 1

P0011
Reference meaning

What does this code mean?

The controller detects that camshaft A timing on Bank 1 is too advanced or does not follow the expected control behavior. In the cited Ford and GM applications this is the intake camshaft. Bank 1 contains cylinder 1; its physical side depends on the engine. The code does not identify a failed position sensor by itself.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

Clear filters

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Before replacing a part

Preserve freeze-frame data and compare commanded with actual cam timing using the correct engine procedure. Check the applicable bulletin and build date before deciding which actuator components need inspection; do not treat a Bank 2 or exhaust procedure as interchangeable.

Scan worksheet →

Manufacturer communications

1

Original wording in English

MERCEDES-BENZ

Reported code forms P001177 P001192 P001195

Noise: A rattling noise may be heard from the area of the chain drive for approx. 2-5 seconds after engine start. And/or: Fault code entries in engine control unit: SIM271DE20: P001177 The position of the intake…

Read communication ↗

Check vehicle applicability

2

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

MakeModelModel year
Mercedes-BenzCLK4302003
Mercedes-BenzCLK4302002

Sources and interpretation

These explanations are editorial summaries of the linked manufacturer material. PDF page numbers count from the first file page. Original publications are in English; translations are reference aids. A cited edition is not a claim that it is the manufacturer's latest instruction.

  1. 2024–2025 MY OBD System Operation Summary for Gasoline Engines ↗

    Ford Motor Company · PDF page(s) 76 ·

  2. 21-NA-146 · MIL illuminated, P0011 and/or P0014 ↗

    General Motors · PDF page(s) 1, 2 ·

Source check date · 2026-10-27

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.