OBD
OBDIICSU

C1951

Severity: Low

Lateral Accelerometer Sensor Circuit Open

Last updated: July 2026

System
Chassis
Subsystem
Chassis Systems
Code Type
Manufacturer-specific

What does C1951 mean?

C1951 is a manufacturer-specific chassis diagnostic trouble code. It is defined as "Lateral Accelerometer Sensor Circuit Open". It falls under the chassis systems area of the vehicle’s chassis system, and its exact meaning can vary between manufacturers.

When is C1951 set?

The onboard diagnostic system sets C1951 when it detects a condition matching "lateral accelerometer sensor circuit open" in the chassis systems circuit or system. When the fault is confirmed, the module stores the code and, in most cases, turns on a warning light.

This code is generally minor and often relates to a signal, range or performance condition. It should still be inspected, especially if it returns after clearing.

Common symptoms

Possible causes

What to check first

  1. Scan the ABS / chassis module for all stored codes
  2. Inspect wheel-speed sensors, tone rings and their wiring
  3. Check connectors and grounds near the affected wheel or component
  4. Compare live sensor data across wheels for one that reads wrong
  5. Clear and road-test to confirm the repair

Frequently asked questions

What does the C1951 code mean?

C1951 means "Lateral Accelerometer Sensor Circuit Open". It is a manufacturer-specific chassis trouble code in the chassis systems area.

Is it safe to drive with a C1951 code?

This code is usually minor, and short-distance driving is often possible, but you should still have it checked — especially if the warning light stays on or the code returns.

How do I fix a C1951 code?

There is no single fix. Start by confirming the code with a scan tool, then work through the likely causes and checks above — inspecting wiring, connectors and the relevant components before replacing any parts. On your specific make, confirm the diagnosis before repairs.

Can I clear the C1951 code myself?

You can clear the code with an OBD-II scan tool, but if the underlying fault is still present it will usually return. Clearing without repair is only useful to confirm whether the fault is active.

Related codes

Important

This information is provided for general reference only. It is not repair advice and may not apply to every make or model. Manufacturer-specific codes can differ. Always confirm a diagnosis with a scan tool and, where needed, a qualified technician before replacing parts.