HomeC13EB · Code meaning and manufacturer information
Chassis

C13EB

Code meaning and manufacturer information

C13EB

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer communications

3

Original wording in English

ITB18-021

INFINITI

Reported code forms C13EB-00

DAST CALIBRATION (MODE1) INCOMPLETE OR C13E9-00/C13EB-00 UNABLE TO ERASE This bulletin applies only to vehicles equipped with Direct Adaptive Steering (DAST). SERVICE INFORMATION This bulletin has information for two…

Read communication ↗

ITB13033A

INFINITI

Reported code forms C13EB

SERVICE INFORMATION: At engine start up, if a low 12 volt battery condition (approximately 8 volts) occurs with an Applied Vehicle, the following conditions may happen: * The Power Steering Warning Light is, or may have…

Read communication ↗

ITB-13-033A

INFINITI

Reported code forms C13EB

INFINITI: SOME VEHICLES MAY EXPERIENCE THE POWER STEERING LIGHT TO BE ON PAIRED WITH DTC C13EB AND C13E9. THE STEERING WHEEL MAY BE OFF-CENTER AND POWER STEERING WILL GO INTO REDUCED POWER ASSIST MODE. THIS IS DUE TO…

Read communication ↗

Check vehicle applicability

12

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

MakeModelModel year
InfinitiQ502018
InfinitiQ502017
InfinitiQ502016
InfinitiQ502015
InfinitiQ502014
InfinitiQ50 HYBRID2017
InfinitiQ50 HYBRID2016
InfinitiQ50 HYBRID2015
InfinitiQ50 HYBRID2014
InfinitiQ602018
InfinitiQ602017
InfinitiQX502019

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.