What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
C0075WHEEL CYLINDER PRESSURE SENSOR OUTPUT on the EyeSight equipped models listed aboveManufacturer communications
6Original wording in English
AUDI
Reported code forms C007500
This bulletin provides information for when the message "Brake servo restricted" is in the cluster with DTC C007500.
SUBARU
Reported code forms C0075
This Service Information Bulletin provides additional steps to follow when diagnosing a DTC C0075: WHEEL CYLINDER PRESSURE SENSOR OUTPUT on the EyeSight equipped models listed above. The information in this bulletin is…
SPRINTER, SPRINTER BUS
Reported code forms C007500
ESP indicator lamp active, fault code C007500 in ESP control unit
SUBARU
Reported code forms C0075
"THIS BULLETIN PROVIDES AN INSPECTION AND ADJUSTMENT PROCEDURE TO ADDRESS A DTC C0075 WHICH MAY BE STORED IN THE VEHICLE DYNAMICS CONTROL AND HYDRAULIC CONTROL UNIT (VDCCM&HCU). THE DTC RELATES TO INCORRECT INPUTS TO…
MERCEDES-BENZ
Reported code forms C007500
XENTRY (DAIMLER): FAULT CODE C007500 IS STORED IN ELECTRONIC STABILITY PROGRAM (ESP) CONTROL UNIT CAUSING INDICATOR LAMP TO BECOME ACTIVE AND DAMAGE, INTERNALLY, BY BEING OVERLOADED, BRAKE LIGHT SWITCH. MODEL 906. *PE
UNKNOWN
Reported code forms C0075
TRACTION CONTROL SYSTEM ANTILOCK BRAKE SYSTEM WARNING LAMP ON WITH SNOW COVERED OR SLIPPERY ROADS AND DIAGNOSTIC TROUBLE CODE C0034 AND OR C0075 SET. *EH
Check vehicle applicability
45A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | AUDI | Year not specified |
| Audi | Q4 E-TRON | 2023 |
| Audi | Q4 E-TRON | 2022 |
| Mercedes-Benz | SPRINTER 2500 | 2015 |
| Mercedes-Benz | SPRINTER 2500 | 2014 |
| Mercedes-Benz | SPRINTER 3500 | 2015 |
| Mercedes-Benz | SPRINTER 3500 | 2014 |
| Sprinter | 2500 | 2008 |
| Sprinter | 2500 | 2007 |
| Sprinter | 2500 | 2006 |
| Sprinter | 2500 | 2005 |
| Sprinter | 2500 | 2004 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.