What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer communications
6Original wording in English
HONDA
Reported code forms C0051-54
Service bulletin - There is an internal issue with the millimeter wave radar software, which may lead to one or more of the following symptoms: - The millimeter wave radar is improperly calibrated, resulting in DTC…
HONDA
Reported code forms C0051-54
Service bulletin - There is an internal issue with the millimeter wave radar software, which may lead to one or more of the following symptoms: ? The millimeter wave radar is improperly calibrated, resulting in DTC…
HONDA
Reported code forms C0051-54
Tech line summary article - Normally, any time you disconnect, jump, or replace the battery, DTC C0051-54 (steering angle neutral position learning incomplete) will set. This DTC clears on its own when the vehicle is…
HONDA
Reported code forms C0051-54
Service bulletin - There is an internal issue with the millimeter wave radar software, which may lead to one or more of the following symptoms: ? The millimeter wave radar is improperly calibrated, resulting in DTC…
HONDA
Reported code forms C0051-54
"TECHLINE SUMMARY ARTICLE - NORMALLY, ANY TIME YOU DISCONNECT, JUMP, OR REPLACE THE BATTERY, DTC C0051-54 (STEERING ANGLE NEUTRAL POSITION LEARNING INCOMPLETE) WILL SET. THIS DTC CLEARS ON ITS OWN WHEN THE VEHICLE IS…
HONDA
Reported code forms C0051-54
"TECHLINE SUMMARY ARTICLE - WHENEVER THE BATTERY IS DISCONNECTED, JUMPED, OR REPLACED, THE FOLLOWING DTC’S ARE STORED: DTC C0051-54 – STEERING ANGLE NEUTRAL POSITION LEARNING INCOMPLETE DTC U0416-68 – VSA NOT ACCEPT…
Check vehicle applicability
1A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Honda | CR-V | 2017 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.