What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer communications
5Original wording in English
FORD
Reported code forms C0030:07
Some 2022 Bronco Sport vehicles built on 04-Aug-2022 and through 05-Aug-2022 may exhibit an ABS warning indicator with diagnostic trouble code (DTC) C0030:07 stored in the ABS module. The vehicle may also exhibit a…
VOLVO
Reported code forms C003007
If a grinding noise occur from the front wheel hub and/or BCM-C003307 or BCM-C003007 DTCs are set, follow the advice under ?Service?. Service: Check if the wheel hub is displaced in the steering knuckle, refer to…
RAM
Reported code forms C0030-02
2016 DS ABS Module Before replacing the ABS module for a wheel speed sensor fault(s) listed below, please call Brittany Potton at cell (248) 494-1087. If you don't receive response within 15 minutes, please continue…
RAM
Reported code forms C0030-02
Before replacing the ABS module for a wheel speed sensor fault(s) listed below, please call Brittany Potton at cell (248) 494-1087. If you don't receive response within 15 minutes, please continue with normal repair…
RAM
Reported code forms C0030-02
Before replacing the ABS module for a wheel speed sensor fault(s) listed below, please call Brittany Potton at cell (248) 494-1087. If you don't receive response within 15 minutes, please continue with normal repair…
Check vehicle applicability
52A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Ford | BRONCO SPORT | 2022 |
| Ram | 1500 | 2016 |
| Ram | 1500 | 2015 |
| Volvo | S60 | 2017 |
| Volvo | S60 | 2016 |
| Volvo | S60 | 2015 |
| Volvo | S60 | 2014 |
| Volvo | S60 | 2013 |
| Volvo | S60 | 2012 |
| Volvo | S60 | 2011 |
| Volvo | S60CC | 2017 |
| Volvo | S60CC | 2016 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.