What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer communications
2Original wording in English
JEEP
Reported code forms B2199-16
If the Power Liftgate (PLG) does not operate following battery drainage or when DTCs B2199-16 or B21DD-16 are active, perform the following steps: 1. Verify Battery Voltage: Ensure battery voltage is at nominal value…
JEEP
Reported code forms B2199-16 B2199-17
Security Gateway Module Battery Voltage - Circuit Voltage Below Threshold - DTC B2199-16 Repair Action : 1) Check OR Replacing cabling. 2) Check OR Replacing connector. 3) Check the battery is good OR Replacing battery.…
Check vehicle applicability
4A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.