AUDI
Reported code forms B200FF0
This bulletin provides informaiton when DTC B200FF0 is stored.
HomeB200F · Manufacturer communications
B200F · Manufacturer communications
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
AUDI
Reported code forms B200FF0 B200FF5
This bulletinprovides information when DTCs B200FF0 to B200FF5 are stpredom the J775 suspension control unit.
AUDI
Reported code forms B200FF4
This TSB provides information when the yellow steering warning lamp lights up when engine is started; DTCs B200000, B200FF4.
AUDI
Reported code forms B200FF4
This TSB provides information when the yellow steering warning lamp lights up when engine is started; DTCs B200000, B200FF4.
AUDI
Reported code forms B200FF0 B200FF5
This bulletin provides information when DTCs B200FF0 to B200FF5 stored in the J775 suspension control unit.
AUDI
Reported code forms B200FF2
This bulletin provides information when various camera-based driver assistance systems are unavailable (DTC B200FF2 (1123875)).
AUDI
Reported code forms B200FF4
This Pending Service Solution (PSS) requests that technicians create a record in the PSS database in instances where the yellow steering warning lamp is on; DTCs B20000 and B200FF4 stored in the J500.
AUDI
Reported code forms B200FF1 B200FF2
This bulletin provides information when there are various messages displayed; DTCs B200FF1 and/or B200FF2 stored in the camera control module.
AUDI
Reported code forms B200FF4
This Pending Service Solution (PSS) requests that technicians create a record in the PSS database when the yellow steering lamp is on, DTCs B200000 and B200FF4 are stored in the J500.
AUDI
Reported code forms B200FF0 B200FF1 B200FF3 B200FF4 B200FF5
This bulletin provides information when DTCs B200FF0, B200FF1, B200FF3, or B200FF4, B200FF5 are stored in the J775 suspension control unit.
AUDI
Reported code forms B200FF0
This bulletin provides information for when there is an active steering malfunction with DTC B200FF0.
AUDI
Reported code forms B200FF0
This bulletin advises that if the warning lamp for the damper control in the instrument cluster is on, and DTC B200FF0 is stored to delete the DTC and perform suspension basic settings.
AUDI
Reported code forms B200FF0 B200FF1 B200FF3 B200FF4 B200FF5
This bulletin provides information for when the messages "Air suspension: system fault" or "Shock absorber system/suspension" is shown in the instrument cluster, and one or more of the following DTCs are stored B200FF0,…
AUDI
Reported code forms B200FF0
This bulletin provides instructions for a software update in cases when "SAFE CP" is displayed in the center of the screen of the Audi virtual cockpit, the gauges function normally, and DTC B200FF0 may be stored.
AUDI
Reported code forms B200FF0 B200FF1 B200FF3 B200FF4 B200FF5
This bulletin provides steps to address DTCs B200FF0, B200FF1, B200FF3, B200FF4, and B200FF5.
AUDI
Reported code forms B200FF0
This bulletin contains repair instructions for DTC B200FF0.
AUDI
Reported code forms B200FF0
This bulletin states to replace the instrument cluster when DTC B200FF0 is stored and SAFE CP is displayed in the Audi virtual cockpit.
AUDI
Reported code forms B200FF1 B200FF2
This bulletin contains repair instructions for DTC B200FF1 and B200FF2.
AUDI
Reported code forms B200FF0
This bulletin contains repair instructions for DTC B200FF0.
AUDI
Reported code forms B200FF0
This bulletin contains repair instructions for DTC B200FF0.