What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer communications
9Original wording in English
MAZDA
Reported code forms B14F0:92
Some vehicles may have one of the following DTCs stored in memory along with a system status notice on the Multi-information display OR display a system status notice with no DTC: C1001:92 - Forward sensing camera (FSC)…
MAZDA
Reported code forms B14F0:92
Some vehicles may have one of the following DTCs stored in memory along with a system status notice on the Multi-information display OR display a system status notice with no DTC: * C1001:92 - Forward sensing camera…
MAZDA
Reported code forms B14F0:92
Some vehicles may have one of the following DTCs stored in memory along with a system status notice on the Multi-information display OR display a system status notice with no DTC: C1001:92 - Forward sensing camera (FSC)…
MAZDA
Reported code forms B14F0:76
FORWARD SENSING CAMERA (FSC) DYNAMIC AIMING NOT COMPLETED AND/OR DTC B14F0:76 STORED. CAUTION: DO NOT turn the igintion OFF after dynamic aiming starts until aiming has completed or aiming timeout. If the ignition is…
MAZDA
Reported code forms B14F0:4B
Some customer may experience all of the following when turning the ignition ON under hot weather conditions such as parking under the hot sun for some period of time: à ̄‚· i-ACTIVSENSE warning light ON (1) à ̄‚·…
MAZDA
Reported code forms B14F0:92
Some vehicles may have one of the following DTCs stored in memory: à ̄‚· C1001:92 - Forward sensing camera (FSC) poor field of view à ̄‚· B14F0:92 - General temporary failure in forward sensing camera (FSC) DTC…
Check vehicle applicability
1A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Mazda | MAZDA3 | 2019 |
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.