What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Manufacturer communications
4Original wording in English
FORD
Reported code forms B14E7:01
Some 2024 Maverick vehicles equipped with low series headlamps and built on 14-Nov-2023 and through 31-Jan-2024 may exhibit one or both headlamp high beams inoperative with diagnostic trouble code(s) (DTCs) B14E5:01…
FORD
Reported code forms B14E7:55
Some 2021 F-150 Non-Raptor vehicles may exhibit inoperative highbeam(s) after using the Ford Diagnosis and Repair (FDRS) scan tool to perform the BCM - Local Interconnect Network (LIN) New Module Initialization…
FORD
Reported code forms B14E7:08
Some 2022 F-150 vehicles may exhibit an inoperative headlamp after a body control module (BCM) software update. There may also be BCM diagnostic trouble codes (DTCs) B14E5:08 and/or B14E7:08 present. This may be due to…
FORD
Reported code forms B14E7:08
Some 2022 model year F-150s may exhibit an inoperative headlamp after a Body Control Module (BCM) software update. There may also be BCM Diagnostic Trouble Codes (DTCs) B14E5:08 and/or B14E7:08 present. This may be due…
Check vehicle applicability
3A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.