HomeB1108 · Code meaning and manufacturer information
Body

B1108

Code meaning and manufacturer information

B1108

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

JeepB1108-15
Rear Right Turn Light-Circuit Short To Battery Or Open(2020 MY only)

NHTSA 10176567

Manufacturer communications

4

Original wording in English

08-054-20

JEEP

Reported code forms B1108-15

Flash: Body Control Module (BCM) Updates This bulletin involves reprogramming the BCM with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination or describe the…

Read communication ↗

TSB-19-55-003

MITSUBISHI

Reported code forms B1108

This is a Technical Service Bulletin that was sent to dealers. The bulletin updates the Heater, Air Conditioning and Ventilation section of the affected Service Manual to update Diagnostic Trouble Code procedures for…

Read communication ↗

TSB-19-55-002

MITSUBISHI

Reported code forms B1108

This is a Technical Service Bulletin that was sent to dealers. The bulletin updates the Heater, Air Conditioning and Ventilation section of the affected Service Manual to update Diagnostic Trouble Code procedures for…

Read communication ↗

TSB-19-55-001

MITSUBISHI

Reported code forms B1108

This is a Technical Service Bulletin that was sent to dealers. The bulletin updates the updates the Heater, Air Conditioning and Ventilation section of the affected Service Manual to update Diagnostic Trouble Code…

Read communication ↗

Check vehicle applicability

5

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

MakeModelModel year
JeepRENEGADE2020
JeepRENEGADE2019
MitsubishiI-MIEV2016
MitsubishiI-MIEV2014
MitsubishiI-MIEV2012

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.