Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
BENTLEY
Reported code forms B101C07
Seat Belt and Safe Guard Alerts - Mechanical malfunction DTC B101C07 evident within 0015. Customer Statement: While driving, the seat belt warning system suddenly comes on and a system safe guard warning also appears in…
PORSCHE
Reported code forms B101C07
Symptom based workshop manual involving the Belt Lock Warning on Driver's Side Permanently Active in Conjunction with Fault Memory Entry with Regard to Belt Lock Switch "B101C07". The vehicles affected are listed in the…
VOLKSWAGEN
Reported code forms B101C07
Clearing DTC B101C07
BENTLEY
Reported code forms B101C07
Seat Belt and Safe Guard Alerts - Mechanical malfunction DTC B101C07 evident within 0015. Customer Statement: While driving, the seat belt warning system suddenly comes on and a system safe guard warning also appears in…
BENTLEY
Reported code forms B101C07
Seat Belt and Safe Guard Alerts - Mechanical malfunction DTC B101C07 evident within 0015. Customer Statement: While driving, the seat belt warning system suddenly comes on and a system safe guard warning also appears in…
AUDI
Reported code forms B101C07
This TSB provides information when the messsage "“Vehicle electronics: fault. Shift to P before leaving vehicle.” appears; DTCs U112300, B101C07.
AUDI
Reported code forms B101C07
This TSB provides information when the messsage "“Vehicle electronics: fault. Shift to P before leaving vehicle.” appears; DTCs U112300, B101C07.
AUDI
Reported code forms B101C07
This bulletin provides information when the message “Vehicle electronics: fault. Shift to P before leaving vehicle.” appears, DTCs U112300, B101C07.
AUDI
Reported code forms B101C07
This bulletin provides information when the seat belt and pre sense warnings appear intermittently while driving; DTC B101C07 stored in the airbag module.
AUDI
Reported code forms B101C13
charge handle doesn’t release, vehicle will not charge, Corrosion on wheelhouse cover plate, U060B00 - no com to G31 boost pressure sensor, Airbag light on, DTCs B101704, B103604, Wind noise from front doors at highway…
AUDI
Reported code forms B101C13
Airbag light on - DTC B101C13, B101D13
AUDI
Reported code forms B101C13
Air suspension warning - DTC P089200 charge handle doesn't release vehicle will not charge Corrosion on wheelhouse cover plate P008700 - low fuel pressure U060B00 - no com to G31 boost pressure sensor Airbag light on,…
BENTLEY
Reported code forms B101C29
DTC B101C29 and/or DTC B101D29 evident within the airbag control unit (J234). Customer statement / workshop findings: One or a combination of the following DTCs are evident within the airbag control unit (J234) B101C29:…
AUDI
Reported code forms B101C07
This bulletin provides information for when there is a seat belt warning, or a pre-sense warning that appears sporadically while driving; DTC B101C07 is stored in the airbag module.
BENTLEY
Reported code forms B101C29
DTC B101C29 and/or DTC B101D29 evident within the airbag control unit (J234). Customer statement / workshop findings: One or a combination of the following DTCs are evident within the airbag control unit (J234) B101C29:…
BENTLEY
Reported code forms B101C29
DTC B101C29 and/or DTC B101D29 evident within the airbag control unit (j234) Customer Statement: -One or a combination of the following DTCs are evident within the airbag control unit (J234) B101C29: Driver seat belt…
VOLKSWAGEN
Reported code forms B101C07
Explanation of DTC B101C07
VOLKSWAGEN
Reported code forms B101C07
DTC B101C07 explanation with no further actions required.
BENTLEY
Reported code forms B101C29
DTC B101C29 and/or DTC B101D29 evident within the airbag control unit (J234). Customer statement / workshop findings: One or a combination of the following DTCs is evident within the airbag control unit (J234) B101C29:…
AUDI
Reported code forms B101C07
This informational bulletin contains instructions on when DTC B101C07 is stored in the airbag control module/ safety computer.
AUDI
Reported code forms B101C07
This informational bulletin contains instructions on when DTC B101C07 is stored in the airbag control module/ safety computer.
AUDI
Reported code forms B101C29
This bulletin contains instructions for when DTC B101C29 and/or B101D29 is stored in the airbag control module.
AUDI
Reported code forms B101C07
This informational bulletin contains instructions on when DTC B101C07 is stored in the airbag control module/ safety computer.
AUDI
Reported code forms B101C07
This informational bulletin contains instructions on when DTC B101C07 is stored in the airbag control module/ safety computer.
AUDI
Reported code forms B101C07
This informational bulletin contains instructions on when DTC B101C07 is stored in the airbag control module/ safety computer.
AUDI
Reported code forms B101C07
This informational bulletin contains instructions on when DTC B101C07 is stored in the airbag control module/ safety computer.