HomeB1000 · Code meaning and manufacturer information
Body

B1000

Code meaning and manufacturer information

B1000

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

FiatB1000-01
Electronic Control Unit - General Electrical Failure stored in the ESL Module

NHTSA 10121872

JeepB1000-01
Electronic Control Unit - General Electrical Failure stored in the ESL Module

NHTSA 10121872

Manufacturer communications

17

Original wording in English

VOS-25-04

VOLKSWAGEN

Reported code forms B10001B

This is a notice for software changes with the ODIS diagnostic program to correct the communication for the airbag control module. For trouble code DTC B10001B. Driver airbag igniter resistance too high -N95

Read communication ↗

VOS-24-129

VOLKSWAGEN

Reported code forms B10001B

This is a notice for software changes with the ODIS diagnostic program to correct the communication for the airbag control module. For trouble code DTC B10001B. Driver airbag igniter resistance too high -N95

Read communication ↗

AUDI

Reported code forms B100011

This bulletin provides information for when the airbag warning light is on, the horn is difficult to activate; DTCs B012E11, B100011.

Read communication ↗

LEXUS

Reported code forms B1000

TSB: Some 2015 ? 2017 model year NX200t, NX300h, and 2016 ? 2017 model year RX350 and RX450h vehicles may exhibit an intermittent MIL ON condition with Diagnostic Trouble Code (DTC) B1000 (Center Airbag Sensor Assembly…

Read communication ↗

LEXUS

Reported code forms B1000

TSB: REVISION NOTICE September 12, 2018 Rev1: ? The Warranty Information, Parts Information, and Calibration Information sections have been updated. Any previous printed versions of this bulletin should be discarded.…

Read communication ↗

L-SB-0148-17

LEXUS

Reported code forms B1000

TSB: Some 2015 ? 2017 model year NX 200t, NX 300h, and 2016 ? 2017 model year RX 350 and RX 450h vehicles may exhibit an intermittent MIL ?ON? condition with Diagnostic Trouble Code (DTC) B1000 (Center Airbag Sensor…

Read communication ↗

View all →

Check vehicle applicability

1,291

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

MakeModelModel year
AudiA32024
AudiA32023
AudiA32022
AudiRS 32024
AudiRS 32023
AudiRS 32022
AudiS32024
AudiS32023
AudiS32022
BuickBUICKYear not specified
BuickCASCADA2017
BuickCASCADA2016
View all vehicle records →

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.