MAZDA
04-007-18-3500
Manufacturer communications
- Publication date
- 2018-09-07
- Received by NHTSA
- 2018-10-09
- NHTSA record numbers
- 10145250
Manufacturer summary
Original wording in English
Some vehicles may experience the TCS/DSC indicator light and the TPMS warning light both ON with DTC C0051:62 stored in memory.DTC C0051:62 - The difference between the initial learned value of the steering angle (as calculated by each sensor) and the steering angle (as calculated by the steering angle sensor) while driving in a straight line, has exceeded its allowable tolerance (or threshold). NOTE: For vehicles equipped with the Smart City Brake System (SCBS), the master warning light also comes ON with the message "SCBS Inspection Required" in the display. The symptoms may occur when the following conditions are met: After starting the engine, the vehicle is driven backwards while the steering wheel is turned to the left or to the right or going forward over a bump while turning the steering wheel. The vehicle is then driven forward and begins accelerating while the steering wheel is still turned. To eliminate this concern, the DSC HU/CM software has been changed.
Reported code forms
Check vehicle applicability
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.