MERCEDES-BENZ
LI27.19-P-080869
原廠技術資料
- 發布日期
- 2026-08-29
- NHTSA 接收日期
- 2026-09-09
- NHTSA 收錄編號
- 11037210
原廠摘要
以下為英文原文
Complaint Temporary no start condition with check engine light and multiple warning messages. When performing a quick test, the following fault code is stored in Y3/14 ‐ Transmission control for 8‐speed dual‐clutch transmission (DKG): P24F100 The wake‐up line of the control unit has a short circuit to positive. Cause Possible signal timing between EZS control unit and Transmission Control Unit (DKG) Remedy As of 7/15/2026, new SCN coding is available for the EZS control unit. IPR will advise to open a TIPS case for EZS (N73), this is due to GLA models requiring support for SCN coding procedure. GLB (X247) and CLA (118) No TIPS case necessary. 1. SCN coding of EZS Control Unit 2. Clear all faults and perform extended road test with multiple drive cycles GLA (H247) Special function password required. 1. Verify if special procedure Central Locking ‐ Development Data is present in EZS (figure 1) 2. Submit a TIPS case to the Powertrain Inbox with the following information: ‐ Initial Quick Test w/ freeze frame data ‐ IPR Result ‐ DKG Control Unit Log ‐ EZS Control Unit Log ‐ Initial EEPROM data ‐ EZS special procedure menu If the vehicle has had this LI performed and P24F100 has returned, please submit a TIPS case to the Powertrain Inbox.
原文故障碼
核對適用車輛
車型關聯可作查閱線索;引擎、生產範圍與軟體條件請核對原廠資料。
| 品牌 | 車型 | 年式 |
|---|---|---|
| Mercedes-Benz | GLB 250 | 2023 |
| Mercedes-Benz | GLB 250 | 2022 |
| Mercedes-Benz | GLB 250 | 2021 |
| Mercedes-Benz | GLB 250 | 2020 |
| Mercedes-Benz | GLB 250 4MATIC | 2026 |
| Mercedes-Benz | GLB 250 4MATIC | 2025 |
| Mercedes-Benz | GLB 250 4MATIC | 2024 |
| Mercedes-Benz | GLB 250 4MATIC | 2023 |
| Mercedes-Benz | GLB 250 4MATIC | 2022 |
| Mercedes-Benz | GLB 250 4MATIC | 2021 |
| Mercedes-Benz | GLB 250 4MATIC | 2020 |