JEEP
18-090-25
Comunicados do fabricante
- Data de publicação
- 2025-10-04
- Recebido pela NHTSA
- 2025-10-08
- Números de registro NHTSA
- 11024062
Resumo do fabricante
Texto original em inglês
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):
• P08A6 - Gear Lever Position Sensor System - Multiple Sensor Correlation.
• P152F - Engine Hood Switch 2 / Engine Hood Switch 1 Correlation. Customers may also comment on one or more of the following:
• Service Transmission message on in the Instrument Panel Cluster (IPC) due to clutch slip detection with the transfer case in neutral.
• Clutch is overheating.
• Clutch is slipping on engagement.
• Inability to accelerate uphill.
• Vehicle does not start.
• Vehicle is stuck in limp-home mode. This bulletin involves reprogramming the PCM with the latest available software.
• P08A6 - Gear Lever Position Sensor System - Multiple Sensor Correlation.
• P152F - Engine Hood Switch 2 / Engine Hood Switch 1 Correlation. Customers may also comment on one or more of the following:
• Service Transmission message on in the Instrument Panel Cluster (IPC) due to clutch slip detection with the transfer case in neutral.
• Clutch is overheating.
• Clutch is slipping on engagement.
• Inability to accelerate uphill.
• Vehicle does not start.
• Vehicle is stuck in limp-home mode. This bulletin involves reprogramming the PCM with the latest available software.
Códigos no documento
Descrição do fabricante
O texto varia por veículo e sufixo; não é diagnóstico universal.
Jeep
P08A6Gear Lever Position Sensor System - Multiple Sensor CorrelationJeep
P152FEngine Hood Switch 2 / Engine Hood Switch 1 CorrelationConfira a aplicação ao veículo
A relação com um veículo é uma pista. Confirme motor, produção e software na documentação do fabricante.
| Marca | Modelo | Ano-modelo |
|---|---|---|
| Jeep | WRANGLER | 2023 |