AUDI
原文のコード表記 P060600
This TSB states to follow GFF in instances when DTC P0ED02 is logged then check the diagnostic address for DTCs P0A1F00, P060400, P062F00, P060600, P061000, P151A00.
意味は車種や後続文字で変わることがあります。原文の記載であり共通診断ではありません。
AUDI
原文のコード表記 P060600
This TSB states to follow GFF in instances when DTC P0ED02 is logged then check the diagnostic address for DTCs P0A1F00, P060400, P062F00, P060600, P061000, P151A00.
AUDI
原文のコード表記 P060600
This bulleti provides information when tehre is a drive system fault; DTCs P060600, P060C00, PA0F00.
AUDI
原文のコード表記 P060600
This Pending Service Solution requests that a PSS record be created when the MIL Drive System: Fault is stored in the ECM with DTC P06C00, P060600, or P0A0F00.
AUDI
原文のコード表記 P060600
This bulletin contains instructions for clearing DTCs P023600 and P060600.
AUDI
原文のコード表記 P060600
This bulletin contains instructions for clearing DTCs P023600 and P060600.
AUDI
原文のコード表記 P060600
Customer may report that the transmission warning light comes on. There are no drivability/starting concerns. DTC P060600 is stored in the TCM. The entry is caused by an overly sensitive diagnosis in the transmission…
AUDI
原文のコード表記 P060600
Supersedes Technical Service Bulletin Group 37 number 13-95 dated February 26, 2013. Customer may report that the transmission warning light comes on. There are no drivability/starting concerns. DTC P060600 (Control…
AUDI
原文のコード表記 P0606
Gearbox warning light briefly comes on. Fault code P0606 stored in TCM
AUDI
原文のコード表記 P060600
Supersedes Technical Service Bulletin Group 37 number 13-89 dated February 11, 2013. Customer may report that the transmission warning light comes on. There are no drivability/starting concerns. GFF scan shows fault…
AUDI
原文のコード表記 P0606
Gearbox warning light briefly comes on. Fault code P0606 stored in TCM.
AUDI
原文のコード表記 P060600
Supersedes Technical Service Bulletin Group 37 number 12-61 dated August 20, 2012. Customer may report that the transmission warning light comes on. There are no drivability/starting concerns. GFF scan shows fault code…