ホームITB18-010 · INFINITI
INFINITI

ITB18-010

メーカー技術情報

発行日
2018-02-27
NHTSA 受理日
2018-03-26
NHTSA 記録番号
10130487

メーカー概要

英語の原文

INFINITI; SERVICE INFORMATION FOR DTCS B2EF0 AND B130C This bulletin applies only to vehicles equipped with Telematics. SERVICE INFORMATION Diagnostic information in the Electronic Service Manuals (ESM) for the following DTCs may be missing or incorrect: -B2EF0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD) -B130C ? TCU (Telematics Control Unit) PAIRING ERROR If one of these DTCs is stored, follow the steps listed below along with the Electronic Service Manual (ESM) to compete the required repairs. DTC B2FE0 ? INTERNAL BATTERY (CIRC VOLT BELOW THRESHOLD): 1. Start the engine and let it idle for 30 minutes (to allow charging of the TCU internal battery). 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. DTC B130C: 1. Collect all keys, and then re-register them to the vehicle. 2. Verify the DTC can be erased. 3. If the DTC will not erase, replace the TCU. NOTE: The related Electronic Service Manuals (ESM) will be updated at a later date. CLAIMS INFORMATION Refer to the current Infiniti Warranty Flat Rate Manual and submit a claim for the repairs performed.

NHTSA メーカー資料 ↗

原文のコード表記

対象車両を確認

掲載車両は調査の手がかりです。エンジン、製造期間、ソフトウェア条件はメーカー資料で確認してください。

メーカー車種モデル年
InfinitiQ502018
InfinitiQ502017
InfinitiQ502016
InfinitiQ50 HYBRID2017
InfinitiQ50 HYBRID2016
InfinitiQ602018
InfinitiQ602017
InfinitiQ702018
InfinitiQ70 HYBRID2018
InfinitiQX302018
InfinitiQX302017
InfinitiQX602018
InfinitiQX602017
InfinitiQX802018

資料の対象範囲 →