StartseiteSSM 55009 · FORD
FORD

SSM 55009

Herstellerinformationen

Veröffentlichung
2026-07-14
Bei NHTSA eingegangen
2026-07-20
NHTSA-Datensatznummern
11035101

Herstellerzusammenfassung

Englischer Originaltext

Some 2021-2026 Bronco vehicles may exhibit a "Park Brake Limited Function Service Required" message in the instrument panel cluster (IPC). This may be due to an issue with the driver door harness connector after removing and installing the removeable doors. If diagnostic trouble code (DTC) B1625:29 is stored in the driver door module (DDM), inspect connector C322C between the upper and lower door hinges that attaches to the body for proper installation and/or pin fitment. Repair as necessary. If the condition was caused by improper door installation, do not submit a claim for this condition. If no concerns are found with the connector, refer to Workshop Manual (WSM), Section 501-11 > Diagnosis and Testing for normal diagnostics.

NHTSA-Herstellerinformationen ↗

Codes im Original

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
FordBRONCO2026
FordBRONCO2025
FordBRONCO2024
FordBRONCO2023
FordBRONCO2022
FordBRONCO2021

Datenabdeckung →