RAM
21-041-25
Herstellerinformationen
- Veröffentlichung
- 2025-10-04
- Bei NHTSA eingegangen
- 2025-10-08
- NHTSA-Datensatznummern
- 11024061
Herstellerzusammenfassung
Englischer Originaltext
Aisin K1 Clutch/Input Shaft Assembly Replacement XW1 Warranty Extension Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC):
• P0731-00 - Gear 1 Shift Incorrect Ratio. NOTE: This DTC will set during a key cycle and shifting into Drive. Customers may also comment on the following:
• The transmission will not shift into or out of 1st - 4th gears. 5th and reverse gears are still available. This bulletin involves replacing the K1 clutch and possibly the K1 input shaft drum sub-assembly.
• P0731-00 - Gear 1 Shift Incorrect Ratio. NOTE: This DTC will set during a key cycle and shifting into Drive. Customers may also comment on the following:
• The transmission will not shift into or out of 1st - 4th gears. 5th and reverse gears are still available. This bulletin involves replacing the K1 clutch and possibly the K1 input shaft drum sub-assembly.
Codes im Original
Wortlaut des Herstellers
Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.
Ram
P0731-00Gear 1 Shift Incorrect RatioFahrzeugzuordnung prüfen
Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.