Startseite18-061-24 · JEEP
JEEP

18-061-24

Herstellerinformationen

Veröffentlichung
2024-07-10
Bei NHTSA eingegangen
2024-07-17
NHTSA-Datensatznummern
11004841

Herstellerzusammenfassung

Englischer Originaltext

"Flash: Powertrain Control Module (PCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):
• P2463 - Particulate Filter Restriction - Soot Accumulation Bank 1. (EE Market Only)**
• P016F - Closed Loop Fuel Pressure Control At Limit - Pressure Too Low.
• P025C - Fuel Pump Module Control Circuit Low.
• P0300-00 - Multiple Cylinder Misfire.
• P0301-00 - Cylinder 1 Misfire.
• P0302-00 - Cylinder 2 Misfire.
• P0303-00 - Cylinder 3 Misfire.
• P0304-00 - Cylinder 4 Misfire.
• P0305-00 - Cylinder 5 Misfire.
• P0403-00 - EGR Control Circuit Open (Disabled Fault).
• P208B - Reductant Pump 1 Control Performance. Other Software enhancements:
• Low speed engine idle improvements.
• Improved engine restart performance and torque response during low fuel level and/or hot ambient conditions. This bulletin involves reprogramming the PCM with the latest available software."

NHTSA-Herstellerinformationen ↗

Codes im Original

Wortlaut des Herstellers

Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
JeepGLADIATOR2022

Datenabdeckung →