Startseite21-042-24 · CHRYSLER
CHRYSLER

21-042-24

Herstellerinformationen

Veröffentlichung
2024-06-12
Bei NHTSA eingegangen
2024-06-18
NHTSA-Datensatznummern
11001830

Herstellerzusammenfassung

Englischer Originaltext

"Internal Transmission Wiring Connector Short and Motor A Bearing Failure Warranty Extension XE1 **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):**
• P0A3F - Drive Motor A Position Sensor 1 Circuit.
• P0A43 - Drive Motor A Position Sensor Circuit Intermittent.
• P0A45 - Drive Motor B Position Sensor 1 Circuit.
• P0C1A - Drive Motor B Torque Delivered Performance. Customers may also comment on the following:
• Vehicle is in limp mode. NOTE: Module flashes are also required for this Repair Procedure to be effective, the following modules are to be updated:
• Hybrid Control Processor (HCP).
• Auxiliary Hybrid Control Processor (AHCP) also known as the Power Inverter Module (PIM). This bulletin involves replacing the transmission."

NHTSA-Herstellerinformationen ↗

Codes im Original

Wortlaut des Herstellers

Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

Datenabdeckung →