StartseiteSSM 51613 · FORD
FORD

SSM 51613

Herstellerinformationen

Veröffentlichung
2023-05-08
Bei NHTSA eingegangen
2023-05-16
NHTSA-Datensatznummern
10236032

Herstellerzusammenfassung

Englischer Originaltext

Some 2022-2023 Bronco Sport and Maverick vehicles built on 04-Sep-2022 and through 30-Dec-2022 may exhibit the engine not restarting after an auto start/stop event with diagnostic trouble code (DTC) P164C stored in the powertrain control module (PCM). The malfunction indicator lamp (MIL) may also become illuminated after the vehicle experiences a second event before it can be brought in for service. This may be due to an internal issue with the PCM. To correct the condition, check the battery condition and state of charge, then replace the PCM and re-evaluate the concern. For claiming, use causal part 12A650 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. If the concern persists, refer to Workshop Manual, Section 303-14B and perform Pinpoint Test AA for normal diagnostics.

NHTSA-Herstellerinformationen ↗

Codes im Original

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
FordBRONCO SPORT2023
FordBRONCO SPORT2022
FordMAVERICK2023
FordMAVERICK2022

Datenabdeckung →