StartseiteITB21-021 · INFINITI
INFINITI

ITB21-021

Herstellerinformationen

Veröffentlichung
2021-09-14
Bei NHTSA eingegangen
2021-10-13
NHTSA-Datensatznummern
10202233

Herstellerzusammenfassung

Englischer Originaltext

REAR HATCH INOPERATIVE OR NOISE WHEN OPENING/CLOSING IF YOU CONFIRM The client states that either the rear hatch is inoperative, or the rear hatch closes after opening only a small amount, AND DTC B2426-23 SPINDLE SENSOR LH and/or DTC B2427-23 SPINDLE SENSOR RH is stored, AND/OR There is a growling type noise from the rear hatch area when opening/closing the rear hatch. ï‚· DTC B2426-23 SPINDLE SENSOR LH and/or DTC B2427-23 SPINDLE SENSOR RH may also be stored. NOTE: If any DTC other than B2426-23 and/or B2427-23 is stored, this bulletin does not apply. ACTION Replace ONLY the spindle unit that is confirmed to be setting one of the DTCs listed above and/or causing the growling noise. Do NOT replace both spindle units when diagnosis leads to replacement of only one. HINT: Rear hatch spindle units are not hydraulic systems. If a rear hatch spindle unit appears to be leaking, this is normal drainage of water (rain, car wash, condensation) and design intended water management. Do not replace spindle units for suspected leaking.

NHTSA-Herstellerinformationen ↗

Codes im Original

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
InfinitiQX502021
InfinitiQX502020
InfinitiQX502019
InfinitiQX552022

Datenabdeckung →