StartseiteNTB15014B · NISSAN
NISSAN

NTB15014B

Herstellerinformationen

Veröffentlichung
2016-04-05
Bei NHTSA eingegangen
2021-05-10
NHTSA-Datensatznummern
10192793

Herstellerzusammenfassung

Englischer Originaltext

IF YOU CONFIRM The customer reports a transmission judder (shake, shudder, single or multiple bumps or vibration). NOTE: A new diagnostic logic has been established to enhance the diagnostic process by storing diagnostic trouble codes (DTCs) on Applied Vehicles. The new DTCs are: P17F1 (CVT_JUDDER [C/U INSPECTION]) P17F0 (CVT_JUDDER [T/M INSPECTION]) ACTION 1. Refer to page 4, step 6 in the SERVICE PROCEDURE to confirm this bulletin applies to the vehicle you are working on. NOTE:The current TCM Part Numbers in this bulletin have been updated. The vehicle you are working on may require reprogramming per this bulletin again. 2. If this bulletin applies, reprogram the TCM (Transmission Control Module) See this bulletin for further detail.

NHTSA-Herstellerinformationen ↗

Codes im Original

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
NissanALTIMA2015
NissanALTIMA2014
NissanALTIMA2013
NissanMAXIMA2016
NissanMURANO2015
NissanPATHFINDER2015
NissanPATHFINDER2014
NissanPATHFINDER2013
NissanQUEST2015

Datenabdeckung →