StartseiteITB20-003 · INFINITI
INFINITI

ITB20-003

Herstellerinformationen

Veröffentlichung
2020-02-10
Bei NHTSA eingegangen
2020-03-06
NHTSA-Datensatznummern
10172177

Herstellerzusammenfassung

Englischer Originaltext

2014-2020 Q50 AND 2017-2020 Q60; TPMS SENSOR LEAKING AIR IF YOU CONFIRM The vehicle has the original equipment wheels and TPMS sensors (tire pressure sensors) installed. AND The owner states that one or more tires has a continuous air leak or looses air pressure multiple times over a 30 day period (approximatively 1 psi every 3 days). NOTE: The TPMS warning lamp may be ON (not flashing) with one or more of the following DTCs stored: ï‚· - C1704, C1705, C1706, C1707, C1730, C1731, C1732, C1733 ï‚· - If the TPMS warning lamp is flashing for more than one (1) minute this bulletin does not apply. Refer to the Electronic Service Manual (ESM) for further diagnostic information. ACTION 1. Confirm that air is leaking between the tire pressure sensor’s valve stem and valve nut of the affected wheel/tire. 2. Replace the valve stem washer/seal and the valve nut and then torque to the new specification.

NHTSA-Herstellerinformationen ↗

Codes im Original

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
InfinitiQ502020
InfinitiQ502019
InfinitiQ502018
InfinitiQ502017
InfinitiQ502016
InfinitiQ502015
InfinitiQ502014
InfinitiQ602020
InfinitiQ602019
InfinitiQ602018
InfinitiQ602017

Datenabdeckung →