StartseiteSSM 47441 · FORD
FORD

SSM 47441

Herstellerinformationen

Veröffentlichung
2018-08-02
Bei NHTSA eingegangen
2018-09-24
NHTSA-Datensatznummern
10144928

Herstellerzusammenfassung

Englischer Originaltext

Some 2018 F-150 vehicles equipped with a 5.0L engine may exhibit an illuminated MIL with DTCs P0390 and/or P0394. These DTCs may be caused by low engine oil level. Before performing any diagnosis or repair, make sure the oil level is between the minimum and maximum marks on the oil level indicator. If the oil level is below the minimum mark, diagnose the low oil level concern first. Refer to the Workshop Manual, Section 303-00. If the oil level is in the normal operating range, inspect C1627. If no concerns are present, replace the bank 2 (LH) exhaust variable camshaft timing (VCT) solenoid. Do not replace camshaft position sensors for these DTCs. For claiming, use causal part 6M280 and applicable labor operations in Section 06 of the Service Labor Time Standards (SLTS) Manual. Engineering is investigating, monitor OASIS for updates.

NHTSA-Herstellerinformationen ↗

Codes im Original

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
FordF-1502018

Datenabdeckung →