StartseiteNTB18-008 · NISSAN
NISSAN

NTB18-008

Herstellerinformationen

Veröffentlichung
2018-02-01
Bei NHTSA eingegangen
2018-03-26
NHTSA-Datensatznummern
10130496

Herstellerzusammenfassung

Englischer Originaltext

ADAS SYSTEM DTC C1A03, C1A04, AND/OR C1B01 SERVICE INFORMATION This bulletin applies only to vehicles equipped with Automatic Emergency Braking (AEB) or Forward Emergency Braking (FEB). SERVICE INFORMATION If the following ICC/ADAS codes are stored, make sure to follow the diagnostic procedures in the Electronic Service Manual (ESM) before replacing any parts. C1A03 ? VEHICLE SPEED SENSOR -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1A04 ? ABS/TCS/VDC SYSTEM -The diagnostic procedure in the ESM includes check and, if needed, repair for ABS DTCs before replacing ADAS components. -If repairs are performed for the ABS system; when compete, perform DTC Confirmation Procedure again before doing any additional repairs. C1B01 CAM AIMING INCMP -The diagnostic procedure in the ESM includes check and, if needed, repair for LANE CAMERA DTCs before replacing ADAS components. -LANE CAMERA DTC may require adjustment of the lane camera. -If repairs/adjustments are performed for the Lane Camera; when compete, perform DTC Confirmation Procedure again before doing any additional repairs.

NHTSA-Herstellerinformationen ↗

Codes im Original

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
NissanALTIMA2018
NissanALTIMA2017
NissanARMADA2018
NissanARMADA2017
NissanMAXIMA2018
NissanMAXIMA2017
NissanMURANO2018
NissanMURANO2017
NissanPATHFINDER2018
NissanPATHFINDER2017
NissanROGUE2018
NissanROGUE2017
NissanSENTRA2018
NissanSENTRA2017

Datenabdeckung →