StartseiteA011255 2030192- · AUDI
AUDI

A011255 2030192-

Herstellerinformationen

Veröffentlichung
2012-10-22
Bei NHTSA eingegangen
2017-11-08
NHTSA-Datensatznummern
10122805

Herstellerzusammenfassung

Englischer Originaltext

MIL light on. P2015 sender of intake manifold flap position/air flow control, implausible signal P2020 sender of intake manifold flap position, intake manifold flap 2, implausible signal. Engine may have reduced performance without significant loss of power or stalling. Check service history to see if the improved ? B? suffix V157 Intake Flap motor has already been installed previously; if yes, only replace the potentiometer seals as described below. The fault entry is made because a linkage of the intake manifold flap adjustment sticks. This is caused by deformed oil seal behind the potentiometers.

NHTSA-Herstellerinformationen ↗

Codes im Original

Fahrzeugzuordnung prüfen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

MarkeModellModelljahr
AudiA62009
AudiA62008
AudiA62007
AudiA82009
AudiA82008
AudiA82007
AudiQ72009
AudiQ72008
AudiQ72007
AudiS52009
AudiS52008
AudiS62010
AudiS62009
AudiS62008
AudiS62007
AudiS82009
AudiS82008
AudiS82007

Datenabdeckung →